Application Scope and Energy Saving Comparison of Shuttle Kiln, Tunnel Kiln and Roller Kiln
Category: Company News
2016-04-01 11:11
Shuttle kiln, tunnel kiln and roller kiln are three important industrial kilns. Below we from the shuttle kiln, tunnel kiln, roller kiln characteristics, scope of application, energy-saving comparison and other aspects of a comprehensive understanding of these three kilns.
1. Shuttle kiln
Gap type production kiln, suitable for small batch production of many varieties, due to the flexibility of production, now many small and medium-sized ceramic porcelain factory also use this kiln. However, due to the gap type, the kiln wall and trolley need to absorb heat and consume energy, which is relatively high in total. However, through the efforts of kiln design and manufacturers, such as fast firing with high-speed burner and light refractory insulation materials to reduce kiln heat storage, some fast firing shuttle kilns have achieved energy saving effect comparable to that of old tunnel kilns.
2. Tunnel kiln
So named, its kiln body is like a tunnel. In fact, the tunnel kiln in a broad sense includes roller kiln, trolley tunnel kiln, push plate kiln and rotary table kiln all belong to the scope of tunnel kiln. Tunnel kiln in the narrow sense. We only refer to the trolley tunnel kiln, but the tide type is called the pusher kiln. I was really confused when I heard it in Chaozhou five years ago. In fact, I want to explain that the pusher kiln is a refractory plate that is directly carried on a high-temperature resistant guide rail (for example, the steel brick guide rail or the corundum ball guide rail can roll in situ). The refractory plates are generally not long, 20 meters long and a few meters short, generally fired high-temperature powder or special ceramics, the daily output is not large. Because the propeller directly pushes the refractory plate forward, it is called push plate kiln. However, I am used to it here, and I also know that Chaozhou's pusher kiln is a trolley tunnel kiln. Due to continuous production, the heat of the preheating zone of the tunnel kiln is basically supplied by the waste heat brought by the flue gas of the firing zone. Since the kiln wall is not like a shuttle kiln, there is no circulating heat loss of heating and cooling, and most of the waste heat of the high-temperature flue gas of the firing zone can be used, so the energy-saving effect is better than that of the gap kiln. However, because the trolley still has to be heated and then cooled, wasting part of the heat, its energy-saving effect and temperature difference are not as good as the roller kiln.
3. Roller kiln
It uses high temperature resistant ceramic sticks to directly drive the refractory board forward, and the refractory board loaded with products is directly carried on the sticks, also known as Laura kiln. We first introduced fired wall floor tiles without supporting plates. The floor tiles were directly placed on sticks. Due to the extremely small temperature difference in the process of preheating, firing and cooling, the firing time was shortened by several tens of minutes from the ten hours we used to use shuttle kilns and tunnel kilns. Therefore, it was extended to artistic ceramics and daily-use ceramics. With the improvement of the quality of sticks, it gradually changed from low temperature type to medium and high temperature type. Because the roller kiln is a refractory plate directly carried on the stick rolling in situ, it does not have to absorb a large part of the heat like a tunnel kiln with a trolley, and it is much better than the air tightness of the tunnel kiln. Therefore, its energy-saving effect is better than that of tunnel kiln. One of its biggest defects is that it is fired into high-temperature reduction products, which requires high quality of sticks. Using silicon carbide sticks can better solve the firing of high-temperature ceramic products within 1350 ℃. But it has not yet solved the kiln change glaze, crystalline glaze firing, because it is faster.
The above analysis, shuttle kiln, tunnel kiln, roller kiln general structure and advantages and disadvantages, enterprises can according to their own product structure, output and economic capacity to choose their own kiln:
1. For the daily output below 20m3, and there are many kinds of products, the firing temperature is one, because its own output is difficult to meet the production of tunnel kiln, it is recommended to use fast firing shuttle kiln.
2. For the daily output or more than 20m3, but the glaze color is complicated. For example, the kiln needs a certain constant temperature and cooling time to change the crystalline glaze. From the economic consideration of building the kiln, the traditional shuttle kiln or electric shuttle kiln can be used. If your kiln changes glaze or crystalline glaze is only part, you can choose a fast kiln, which is not only fast, but also slow. Slow, the temperature difference can be controlled very small. But slow energy saving effect is poor.
3. For large output, high height, heavy weight, high temperature and single glaze color, trolley type tunnel kiln can be used. Such as high temperature daily ceramics, bathroom ceramics
4. For art ceramics, daily ceramics and bathroom ceramics with large output within 1300 ℃, it is recommended that you use roller kiln or large-scale fast shuttle kiln.
The advantages and disadvantages of electric kiln and gas kiln: electric kiln because the heating body does not produce flue gas, only the volatiles of the body itself are discharged in the firing process. For shuttle kiln, the kiln can be sealed, only a few exhaust holes are needed, and no flue gas brings out heat. Sintering below 1200 ℃ low temperature oxidation firing, now the production cost is lower than the gas kiln. It is estimated that the electricity price is 0.8 yuan/degree and the liquefied gas price is 6.2 yuan/KG. This price ratio is a balance point. The continuous electric roller kiln is used to burn oxidation products below 1220 ℃. At present, the production cost is more than 15% lower than that of the gas roller kiln. However, a transformer above 200kva is required, which is not a small investment. For ceramic factories with excess transformer capacity, electric hot wires can be installed in the preheating zone or near the firing zone to preheat and heat up. The high temperature zone still uses gas, but the electric kiln cannot burn and reduce, for firing above 1260 ℃, the quality of the heating element is higher and the price is more expensive. Above 1280 ℃ to burn the heating body to use silicon molybdenum rod. Silicon molybdenum rods are easy to age and their service life is not too long. The selection of electric furnace depends on the electricity price. Areas with lower average electricity price can choose electric furnace. It is cost-effective to refit electric furnace on the original furnace under the condition of high electricity price and high price of liquefied gas, but it is necessary to retain the original gas function.